Noise Control in Air Mechanical Ventilation Systems with Three-Dimensional Metamaterials

The diffusion of mechanical ventilation systems increased rapidly due to the climate changes in all parts of the world. The mechanical ventilation systems are mainly used in the summer for many difficulties to face very hot temperatures. One of the biggest problems considered if every residential unit is equipped with a mechanical ventilation system is the generation of noise by the rotating blades of the fan for refrigeration. This paper discusses the applications of metamaterials to create attenuation filters to be installed inside the encases of the mechanical ventilation systems in order to obtain sound attenuation. A three-dimensional reticular structure made with spheres has been studied in different configurations related to the numbers of layers employed. The sound attenuations were measured at some specific octaves, depending on the particular configurations. In general, the sound attenuation peaks have been measured between 4 kHz and 8 kHz; this is expected to mitigate the tonal noise component typical of fans based on different variables that compose the whole system (e.g., fan diameter, number of blades, fan speed). However, the outcomes shall be considered in terms of laboratory conditions since material properties of the enclosure and potential polarization effects due to reflection of sound waves at the boundaries may occur