Despite significant progress in research and development of aluminum shear panels in recent decades, their implementation for seismic retrofit of existing reinforced concrete (RC) buildings can still be significantly extended. Their application is limited by the general lack of relatively simple and effective design criteria and proper guidelines. This paper develops a design method for the seismic retrofit of reinforced concrete buildings using aluminum multi-stiffened shear panels as dampers. Both the nonlinearity in the structure and the dampers-structure interaction are considered to give an optimal distribution of the shear panels over the height of the building. The analytical laws refer to dissipative aluminum shear panels recently tested and analyzed by the authors. The proposed procedure has been described in detail. Its applicability has been demonstrated by analyzing two typical RC buildings having drift capacity-to-demand ratios ranging from 0.505 to 0.624. The design value of the panel-to-frame stiffness ratio has been found to range from 0.594 to 1.432 as a function of the lateral stiffness of the existing building. The verification of the proposed procedure has been carried out by checking the validity of the design assumptions. The first one (i.e., the mode shapes remain the same before and after retrofit) has been checked using the modal assurance criterion that gives values ranging from 0.992 to 0.998. The second one (i.e., uniform yield drift distribution over the building height) has been checked by comparing the yield drifts with their average value giving a standard deviation ranging from about 11 to 15%. The effectiveness of the design method has been finally validated through nonlinear time-history analysis for different seismic accelerograms and hysteresis models. The results show that the seismic retrofit design procedure is effective in significantly reducing inter-story drift (maximum inter-story drift ratio demands ranging from 1.04 to 2.07%) thus satisfying the acceptance criteria of the building, and avoiding drift concentration and consequential weak story collapse.
A design method for seismic retrofit of reinforced concrete frame buildings using aluminum shear panels
Ferraioli M.
;De Matteis G.
2023
Abstract
Despite significant progress in research and development of aluminum shear panels in recent decades, their implementation for seismic retrofit of existing reinforced concrete (RC) buildings can still be significantly extended. Their application is limited by the general lack of relatively simple and effective design criteria and proper guidelines. This paper develops a design method for the seismic retrofit of reinforced concrete buildings using aluminum multi-stiffened shear panels as dampers. Both the nonlinearity in the structure and the dampers-structure interaction are considered to give an optimal distribution of the shear panels over the height of the building. The analytical laws refer to dissipative aluminum shear panels recently tested and analyzed by the authors. The proposed procedure has been described in detail. Its applicability has been demonstrated by analyzing two typical RC buildings having drift capacity-to-demand ratios ranging from 0.505 to 0.624. The design value of the panel-to-frame stiffness ratio has been found to range from 0.594 to 1.432 as a function of the lateral stiffness of the existing building. The verification of the proposed procedure has been carried out by checking the validity of the design assumptions. The first one (i.e., the mode shapes remain the same before and after retrofit) has been checked using the modal assurance criterion that gives values ranging from 0.992 to 0.998. The second one (i.e., uniform yield drift distribution over the building height) has been checked by comparing the yield drifts with their average value giving a standard deviation ranging from about 11 to 15%. The effectiveness of the design method has been finally validated through nonlinear time-history analysis for different seismic accelerograms and hysteresis models. The results show that the seismic retrofit design procedure is effective in significantly reducing inter-story drift (maximum inter-story drift ratio demands ranging from 1.04 to 2.07%) thus satisfying the acceptance criteria of the building, and avoiding drift concentration and consequential weak story collapse.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
